Tuesday, June 2, 2015

CORE NETWORK (CN)

The Core Network (CN) contains the functional units described in the following sections.
Mobile Services Switching Center (MSC) / Mobile Services Switching
Center (MSC) Server
The MSC (Server) is responsible for setting up, routing, and supervising calls to and from the mobile subscriber (mobility management, handover,…). Short messages, routed from the SMSGMSC or sent from the Mobile Station (MS) / User Equipment (UE), are relayed in the MSC.

Gateway MSC (GMSC) / Gateway MSC (GMSC) Server
The GMSC is an MSC serving as an interface between the mobile network and other networks, such as the Public Switched Telephony Network (PSTN), Integrated Services Digital Network (ISDN) and other Public Land Mobile Networks (PLMN) for mobile terminating calls. It contains an interrogation function for retrieving location information from the subscriber’s HLR. The GMSC contains functions for rerouting a call to the Mobile Subscriber according to the location information provided by the HLR.
Visitor Location Register (VLR)
The VLR temporarily stores information about the MS/UE currently visiting its service area.
In an Ericsson’s WCDMA Systems network, the VLR is integrated with the MSC
Media Gateway (MGW)
The Media Gateway acts as an interface between the Core Network and ATM based networks (WCDMA RAN and ATM Backbone ).
Combined MSC Server/Media Gateway (MSC Server/MGW)
The MSC Server and the MGW can be co-located in the same physical GSM MSC/VLR node.
Home Location Register (HLR)
The HLR database stores and manages all mobile subscriptions belonging to a specific operator. The HLR stores permanent data about subscribers, including subscriber's supplementary services, location information, and authentication parameters. When a person buys a subscription, it is registered in the operator’s HLR. The HLR can be implemented with the MSC/VLR or as a standalone database.
The HLR uses Mobile Application Part (MAP) signaling towards the other nodes (Except for PC-based AUC).
Flexible Number Register (FNR)
FNR was introduced with Ericsson’s release to provide a flexible number function, which enables mobile operators to allocate subscriber MSISDN freely without restricting it to the MSISDN series, held in the HLR where the corresponding IMSI series is held.
FNR is modified to provide the function of number portability with GSM R7 in addition to flexible numbering. Number portability is a network feature that allows the subscribers
to retain their MSISDN when they change their service provider within one country, based on the agreement between different network operators.
FNR is a database, which stores all the information needed to perform SCCP message translation before rerouting an incoming call to the correct HLR. The FNR has the same platform as HLR. It can be implemented as a standalone node or can be co-located with the other Ams (Application Module).
Authentication Center (AUC)
The AUC database is connected to the HLR. The AUC provides theHLR with authentication parameters and ciphering keys by generating triplets or quintuplets depending on GSM or WCDMA SYSTEMS Release. Using these triplets or quintuplets, ciphering of speech, data, and signaling over the air-interface is performed. Both provide system security.
The AUC is available as a PC or VAX-based system or as an integrated AUC. The PC-based version is connected to the Input/Output Group 20 (IOG20) similar to an operator terminal.
The VAX-based version uses MAP signaling and is connected via S7 signaling links. The integrated AUC is implemented on an RPD within the AXE 10 and can be co-located with a MSC/VLR. There is also support for RPG/RPG2 (apart from RPD): a new and more powerful RP built for the new building practice BYB 501. The RPG/RPG2 is also more than ten times more powerful than RPD. It is smaller and contains fewer boards.
Equipment Identity Register (EIR)
The EIR database validates mobile equipment. The MSC/VLR can request the EIR to check if a MS/UE has been stolen (black listed), not type-approved (gray listed), normal registered (white listed), or unknown.
The EIR is connected to the VLR via the S7 network and uses MAP signaling.
The EIR is implemented as a UNIX operating system or as a VAX computer platform.
Short Message Service - Gateway MSC (SMS-GMSC)
The SMS-GMSC routes MS/UE-terminated short messages. For signaling to GSM and WCDMA Systems entities, MAP signaling is used. For signaling to an Ericsson SC, an Ericsson variant of MAP is used.
Any MSC/GMSC can be implemented as an SMS-GMSC.
Serving GPRS Support Node - SGSN
The Serving GPRS Support Node is a primary component in the GSM and WCDMA Systems network using GPRS. It forwards incoming and outgoing IP packets addressed to/from a MS/UE that is attached within the SGSN service area.

The SGSN handles packet routing and serves all subscribers that are physically located within the geographical SGSN service area. The (packet-switched) traffic is routed from the SGSN to the BSC/RNC, via the BTS/node B to the User Equipment.

NETWORK NODES

BASE STATION SYSTEM (BSS) / WCDMA RADIO ACCESS NETWORK
(WCDMA RAN)
The Base Station System (BSS) and the WCDMA Radio Access Network (WCDMA RAN) consists of the functional units described in the following sections.
Base Station (BS)
A Base Transceiver Station (BTS) is the GSM radio equipment required to serve one cell. It contains the antenna system, radio frequency power amplifiers and digital signaling equipment. The
Ericsson product for the BTS is the Base Station (BS).
The system versions are:
BS 2000 for GSM 900, GSM 1800, and GSM 1900
BS 200 for GSM 900 and GSM 1800
Node B
A node B is the WCDMA SYSTEMS radio equipment required to serve one cell. It contains the antenna system, radio frequency power amplifiers, and digital signaling equipment.
The system versions are:
RBS 3000 for WCDMA RAN
Base Station Controller (BSC)
The BSC controls and supervises a number of BSs and radio connections in the system. It handles the administration of cell data and the locating algorithm, as well as ordering handovers.
The node is based on the Ericsson Digital Switching System AXE 10 switch.
Radio Network Controller (RNC)
The RNC houses radio network control functions, such as connection establishment and release, handover, power control, and radio resource handling functions. Diversity combining devices and the radio link functions will also be located in the RNC.

The node is based on Ericsson’s new generic ATM switch infrastructure, which handles packet based traffic cost effectively.

GSM AND WCDMA NETWORK

The GSM R10/WCDMA CN 3.0 network is a multi-service network. It accommodates the growing number of interconnections between a variety of networks, both circuit-switched and packetswitched, narrowband and broadband, voice and data, fixed and mobile. For the operator, the GSM/WCDMA network means continuity of services, optimized end user application portfolios and significant cost reductions in transmission, operation and maintenance.

The Core Network of the GSM/WCDMA supports both Circuit Switched and Packet Switched services.


Figure 1-1 illustrates the Layered CS core network architecture with logical nodes and Figure 1-2 the corresponding monolithic core network architecture with monolithic nodes.


The system contains the following components:
·         Base Station System (BSS)
– Base Station (BS)
– Base Station Controller (BSC)
·         WCDMA Radio Access Network (WCDMA RAN)
– Base Station (BS)
– Radio Network Controller (RNC)
·         Core Network (CN)
– Mobile services Switching Center (MSC)
– Mobile services Switching Center (MSC) Server
– Gateway MSC (GMSC)
– Gateway MSC (GMSC) Server
– Visitor Location Register (VLR)
– Home Location Register (HLR)
– Authentication Center (AUC)

– Equipment Identity Register (EIR)
– Short Message Service - Gateway MSC (SMS-GMSC)
– Short Message Service - InterWorking MSC (SMS-IWMSC)
– Serving GPRS Support Node ( SGSN )
– Gateway GPRS Support Node ( GGSN )
– Data Transmission Interworking unit (DTI)
– Flexible Number Register (FNR)
– Media Gateway (MGW)
– Combined MSC Server/Media Gateway
·         Additional items possibly connected
- Mobile Intelligent Network (MIN)
- Billing Gateway (BGW)

- Service Order Gateway (SOG)